Table of Contents
Advertisement
9
Preparation
9
Inserting the needle
.01
Fig. 9 - 01
All regulations and instructions in this Instruction Manual are to be observed!
Special attention is to be paid to the safety regulations!
All preparation work is only to be carried out by appropriately trained personnel.
1
2
Turn off the machine!
Danger of injury if machine is
switched on suddenly!
Only use system 134-35 needles.
Raise the needle bar via the handwheel.
Loosen screw 1, insert needle 2 and
move upward until it stops.
Align needle 2 so that the clearance cut
faces the hook and tighten screw 1.
Preparation
9 - 1
Advertisement
Table of Contents
