9
Winding the bobbin thread / regulating the bobbin winder tension
.03
5
Fig. 9 - 03
●
Fit empty bobbin
outside.
●
Thread the thread as shown in Fig.
an anti-clockwise direction.
●
Switch on the bobbin winder by pressing bobbin winder spindle
ously.
●
To adjust the bobbin winder tension turn knurled screw
●
The bobbin winder stops automatically, when bobbin
●
Remove the fi lled bobbin
1
3
2
1 onto bobbin winder spindle 2 with the rest thread chamber on the
The bobbin fi lls up during sewing.
1 and cut the thread on knife 5.
If the thread is wound unevenly, loosen nut 6 and turn thread guide 7 accordin-
gly. Retighten nut 6 after the adjustment.
4
+
9.03 and wind it around the bobbin 1 a few times in
4.
1 is fi lled suffi ciently.
Preparation
-
6
7
2 and lever 3 simultane-
29