Table of Contents
Advertisement
Adjustment
13
Distance of knife to needle
.07.12
13 - 32
Requirement
There should be a distance of 4 mm between the front edge of knife 1 and the needle.
4 mm
1
2
Fig. 13 - 31
Position the needle bar at BDC.
Slide knife 1 under the locking tab and align according to the requirement.
Slightly tighten screw 2.
Actuate the engaging lever by hand.
Turn the handwheel until the wedge point in the thread catcher is just in front of the
cutting edge of the knife.
Align knife 1 in such a way that the right edge of the knife does not protrude over the
right, inset edge of the thread catcher (see arrow).
Tighten screw 2.
1
Advertisement
Table of Contents
