Table of Contents
Advertisement
10
Sewing
Fig. 10 - 01
Switch on machine at main switch 1.
Move feed carriage 2 manually to zero point (in direction of arrow until it stops).
Press the home position key on the control panel.
(Feed carriage moves to home position.)
Confirm zero point via the Enter key or reset (see chapter 8.04 Checking/setting zero
point).
Select program number (see chapter 9.06 Selecting the program number).
Call SEWING mode (diode on the key must be lit).
Press program start key.
(Feed carriage moves to loading position and the positioning clamp of the sewing jig
opens.)
Insert sewing jig (see chapter 9.07 Inserting sewing jig).
Bring foot switch 3 to switch level 1 (sewing jig is positioned).
To start sewing, bring foot switch 3 to switch level 2.
2
We recommend that a test run is carried out when the machine is
commissioned and after a new seam program has been entered.
3
Sewing
1
10 - 1
Advertisement
Table of Contents
