Adjustment Of Bobbin Winder Stop - Pfaff performance 2054 Service Manual

18. Adjustment of bobbin winder stop

Requirement:
The bobbin winder must stop when the thread has reached a level of 1 mm below the bobbin rim.
Check:
• Wind a bobbin and check that the winder stops as required.
Adjustment:
• Loosen screw 72 (fig. 43).
• Position stop 73 to the left for less thread and to right for more thread.
• Tighten screw 72.
Cross-check:
• Wind a bobbin and check that the winder stops as required.
46