28. Adjustment of bobbin winding
Check
When winding up the lower thread onto the bobbin the machine should wind even.
Adjustment
1.
Place empty bobbin on spindle.
2.
While winding , observe the shape of bobbin winding:
- When the lower part of bobbin winding has more thread turn the screw (b) of threader guide
counterclockwise.
- When the upper part of bobbin has more thread, turn the screw (a) of threader guide clockwise.
2
29. Adjustment of bobbin winder stop
Check
When winding up the lower thread onto the bobbin the machine should stop when there is a min. of 1 mm
between the edge of the bobbin and the thread.
Adjustment
When winding up the lower thread onto the bobbin the machine should stop when there is a min. of 1 mm
between the edge of the bobbin and the thread. (3)
If bobbin is over 0 mm between the edge of the bobbin and the thread, adjust by
turning the screw (c) of bobbin winder bracket shaft counter-clockwise.
38
Settings
b
3
104 73 15-26
c