Table of Contents
Advertisement
sequentially to form a rectangular on the preview window with the mouse. The
rectangular area between these 2 points is filled with color and this is the motion
areas.
Press
to have the entire screen selected for motion detection.
Press
to clear all selections.
Press
and click on the polygon, to erase that polygon.
There are 4 possible motion trigger areas, which can be distinguished by 4
different colors. Check the Enable checkbox to enable event actions related to that
area.
For each area, you can set the event action in response to motion detection in that
area. Event actions can be set in "Event" section.
In addition, you can set the Sensitivity level for the motion trigger separately for
each area by selecting from 1 (low), 2, 3, 4, 5, 6, 7, 8, 9 to 10 (high).
Press Apply to apply the setting changes or Reset to reset without saving the
change.
5.7.3 Alarm I/O
39
EHN3200
Advertisement
Table of Contents
