Table of Contents
Advertisement
if the SD card is full and Overwrite is "Off".
Press Apply to apply the setting changes or Reset to reset without saving the
change.
SD Card Utility
The total size and available size of the SD memory card will be displayed.
Depending on the state of the SD memory card, the information will be displayed
as follows:
Indication Description
Capacity ___ MB, available ___MB, used ___ %
Formatting the SD Card
Before formatting the SD memory card, it is necessary to press the
button.
Once the
user to re-insert the SD card.
Press
button to format SD card.
To obtain images from the SD memory card
1. Directly attach the SD card to a PC after removing the SD card from the camera.
Access the camera using the Windows command prompt or FTP client software.
→ The window with the user name and password entry fields will be displayed.
2. Enter the user name whose access level is "Administrator" and its password.
→ Log in the camera.
3. A directory of all saved data will be displayed. You are now ready to obtain
images from SD card.
Note:
- It is impossible to access the SD memory card in the process of formatting.
- All data saved on the SD memory card will be deleted when the SD memory
card is formatted.
- Do not turn the power of the camera off in the process of formatting.
button is pressed, the
45
EHN3200
button will be shown for a
Advertisement
Table of Contents
