EverFocus EHN3200 User Manual page 24

Set SNMP Server
SNMP is the Simple Network Management Protocol.
The SNMP protocol is used by network management systems to communicate with
network elements.
Many network elements support only SNMPv1, SNMPv2 and SNMPv2c. Support
for SNMPv3 is minimal.
Version
SNMPv1 SNMPv1, which implements community-based security
SNMPv2c SNMPv2 with community-based security
SNMPv2 SNMPv2 with party-based security
SNMPv3 SNMPv3, which implements user-based security
Enable SNMP v1/v2/v2c: Check the box to enable SNMP v1/v2/v2c.
Read-Only Community: Identifies the community string for read-only access.
The community string has to be the same as that set in NMS.
Read-Write Community: Identifies the community string for read and write
access.
The community string has to be the same as that set in NMS.
Trap Community: The community string used for the traps.
Trap Address: Identifies the IP address of the trap destination
Enable SNMP v3: check the box to enable SNMP v3.
Read-only Username: Set the user name to be used for authentication and privacy.
(Read-only)
Read-only Auth. Method: Select authentication method which will be used with
the password to authenticate with the device. (Read-only)
Read-only Auth. Key: Set authentication password. (Read-only)
Description
24
EHN3200