EverFocus EHN3200 User Manual page 19

Hide thumbs Also See for EHN3200:
Table of Contents

Advertisement

Gateway
This field is to set the gateway for your network so the IP camera will be
recognized within the network. When DHCP is selected, the DHCP server will
assign this value automatically.
Primary DNS
An IP address of DNS server that is provided by ISP. This address may be assigned
automatically if DHCP is used. A correct DNS IP is essential if DDNS will be
used.
Secondary DNS
If your ISP provides you an IP address secondary DNS, please set it here.
Username
Enter User name of the account (used only for PPPoE).
Password
Enter Password of the account (used only for PPPoE).
Port Settings
HTTP Port
Enter HTTP port number.
RTSP Port
Enter RTSP port number.
Multicast Setting
Multicast provides the most efficient usage of bandwidth when there are large
numbers of clients viewing simultaneously. A multicast broadcast cannot however,
pass a network router unless the router is configured to allow this. It is not possible
to multicast over the Internet, for example. Note also that all multicast viewers
count as one unicast viewer.
Enable Multicast: Check the box to enable multicast. Multicast provides the most
efficient usage of bandwidth when there are large numbers of clients viewing
simultaneously. A multicast broadcast cannot however, pass a network router unless
the router is configured to allow this. It is not possible to multicast over the Internet,
19
EHN3200

Advertisement

Table of Contents
loading

Table of Contents