EverFocus EHN3200 User Manual page 27

(CBR).
Constant Bit Rates: 6M/5M/4M/3M/2M/1.5M/1M/750K/500K/384K/256K bit/s
CBR allows you to set a fixed Target bit rate that consumes a predictable amount of
bandwidth. As the bit rate would usually need to increase for increased image
activity, but in this case cannot, the frame rate and image quality are affected
negatively.
Variable Bit Rates: Highest/High/Normal/Low/Lowest
VBR adjusts the bit rate according to the image complexity, using more bandwidth
for increased activity in the image, and less for lower activity.
Resolution:
For single H.264 stream
1920x1080, 1440x1080, 1280x720, 1024x768, 720x576, 720x480, 704x576,
704x480, 640x480, 352x288, 352x240, 320x240
For single JPEG stream
1280x720, 1024x768, 720x576, 720x480, 704x576, 704x480, 640x480, 352x288,
352x240, 320x240
For H.264+JPEG dual streaming
H.264 1280x720 can combine with JPEG to make all resolution under D1
For H.264+H.264 dual streaming
H.264 1280x720 can combine with H.264 to make all resolution under D1
Frame Rate: select from NTSC: 30 / 15 / 10 / 7.5 / 6 / 3 / 1 fps ; PAL: 25 / 12.5 / 8
/ 6 / 5 / 2.5 / 1 fps
Note:
1. Stream 2 is used for either test video output or video stream output. Whenever the
Stream 2 is enabled, test video out will be off. If user wishes to use the test video
out, please disable Stream 2.
2. Bandwidth utilization will be in proportion to the quality setting, with highest
quality requiring highest bandwidth.
3. System performance may be influenced if user enables 2 video streams
simultaneously.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
27
EHN3200