Event Settings - EverFocus EHN3200 User Manual

Hide thumbs Also See for EHN3200:
Table of Contents

Advertisement

Note:
1. * Record to PC only works when PC and IP camera are connected.
2. **Only Upload to FTP can be selected to record event video to remote site.
3. Up to 10 event types can be configured in the camera, and up to 3 of these
can be configured to upload images

5.7.1 Event Settings

The settings relating to event occurrences such as settings for motion,
schedule can be configured on this page.
The "Event " page has 4 tabs: [Event Settings] tab, [Motion Detection] tab, [Alarm
I/O] tab and
[Schedule] tab.
Event List
Press
button to add an event condition.
To modify the event list, click on the event and it will be highlighted. Press
button to modify the setting.
To remove an event from event list, click on the event and it will be highlighted.
Press
button to remove the event.
Check Enable checkbox to activate event actions when the event occurs in the
specified time zone.
.
36
EHN3200
alarms
and

Advertisement

Table of Contents
loading

Table of Contents