Language Settings
Language: Select the language to be displayed in web page. Default language is
English. To add a new language which is not listed in the original configuration,
press the Browse button to locate the new language file (.evb) and then click the
Load button.
Note:
Uploading a new language file will reboot the system automatically. Please reconnect
to the IP camera after reboot.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
5.3 Network
The network settings and the settings relating to Network, DDNS, SMTP/FTP,
SNMP and Network Alarm can be configured on this page.
The "Network setup" page has 5 tabs: [Network] tab, the [DDNS] tab, the
[SMTP/FTP] tab, the [SNMP] tab and the [Network Alarm] tab.
5.3.1 Network
17
EHN3200