EverFocus EHN3200 User Manual page 12

Press the calendar icon to select the date and time to be searched. Press
button to start time search. In "Recording List" section, the file name and file
information that is the most close to the specified time will be displayed. Click the
file name that you wish to playback and press
3. Search by Event:
Select which event type(s) to search for. Choose from Alarm, Motion or Video Loss. Select
"Start Time" and "End Time". Press "Search" button to start time search. In "Recording
List" section, file name and file information will be displayed. Click the file name that
you wish to playback and press
Check "Multiple Files" and the playback function will keep playing to next file until
the end of file list in the same folder.
Check "Loop Again" and playback function will loop playback the selected file.
Playback the selected video
Pause the playback video
Stop the playback video
Snapshot the current image. The video image currently being displayed
will be saved as a .jpg file. The location where the snapshot data is saved can be
specified in "Setting -> User Config. ". Please refer to "Section 5.2 User Config" for
further information.
Zoom In the image
Zoom Out the image
Archive the video file. Specify the recording path if you wish to save the
file to your local PC.
Lock the selected file. The file saved in the SD card will be overwritten
if the setting in "System->SD Card->Overwrite" is ON, however the data being
locked will be protected from overwriting.
button.
button.
12
EHN3200