Table of Contents
Advertisement
Set SMTP
The settings relating to the mail server used to send the e-mail notification from the
camera to predefined addresses via SMTP can be configured.
SMTP Server: Enter the IP address or the host name of the SMTP server used to
send e-mails
.
SMTP Port: Enter the port number for SMTP. Default is 25.
Authentication: Check the box, if the SMTP server requires Authentication (user/
password).
User Name: Input the login user ID if the SMTP server requires Authentication.
(max. 31 bytes; a-z;A-Z;0-9;@)
Password: Input the password if the SMTP server requires authentication. (max.
15 bytes; a-z;A-Z;0-9;@)
Receiver Address: Input the e-mail address to receive an e-mail message when the
EVENT is enabled and triggered. Please use ";" to separate address.
Sender Address: Input sender's e-mail address, so that receiver can recognize the
sender when an event message is sent out.
Attach image: Check the box to send an e-mail notification with a FPS video file
attached.
Send Test Mail: Press
address.
Set FTP
The settings relating to an FTP server to be used to receive alarm images can be
configured.
FTP Server: Enter the IP address or the host name of the FTP server.
button to send a test e-mail to the designated
22
EHN3200
Advertisement
Table of Contents
