IP Connectivity Test (Ping)
Use the IP Connectivity Test to see if another site on the Internet can be
reached. The screen shown below is described in the following table.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
IP Address
Test Times
Interval
Success/Failure
9033820-03
Vertical Horizon Stack Local Management
Network Configuration : IP Connectivity Test (Ping)
IP Address :
Test Times : 1
Success
: 0
[Start]
Figure 2-10. IP Connectivity Test
Description
IP address of the site you want to ping.
The number of ICMP echo requests to send to the specified site.
Range: 1~1000
The interval (in seconds) between pinging the specified site.
Range: 1~10 seconds
The number of times the specified site has responded or not to
pinging.
Interval : 3
Failure
: 0
<OK>
VH-2402S2 User Interface 19