Enterasys VH-2402-L3 Management Manual page 60

Vertical horizon fast ethernet switch
Hide thumbs Also See for VH-2402-L3:
Table of Contents

Advertisement

multicast messages (IGMP) coming from the network to be
propagated to the router.
A router port has the following behavior:
To setup a static router port, highlight Static Router Port
Settings from the Multicasting Menu and press enter.
Parameter
52 VH-2402-L3 Management Guide
All IGMP Report packets will be forwarded to the
router port.
IGMP queries (from the router port) will be flooded to
all ports.
All UDP multicast packets will be forwarded to the
router port. Because routers do not send IGMP
reports or implement IGMP snooping, a multicast
router connected to the router port of the Layer 3
switch would not be able to receive UDP data
streams unless the UDP multicast packets were all
forwarded to the router port.
A router port will be dynamically configured when
IGMP query packets, RIPv2 multicast, DVMRP
multicast, PIM-DM multicast packets are detected
flowing into a port.
Figure 1-38. Static Router Port Settings
Description
9033691-01

Advertisement

Table of Contents
loading

Table of Contents