Table of Contents
Advertisement
Saving Changes
The VH-2402-L3 has two levels of memory; normal RAM
and non-volatile or NV-RAM. Configuration changes are
made effective by highlighting Apply and pressing Enter.
When this is done, the settings will be immediately applied to
the switching software in RAM, and will immediately take
effect.
Some settings, though, require you to restart the switch
before they will take effect. Restarting the switch erases all
settings in RAM and reloads the stored settings from the NV-
RAM. Thus, it is necessary to save all setting changes to
NV-RAM before rebooting the switch.
10 VH-2402-L3 Management Guide
Selecting APPLY from a console menu makes
the configuration effective for the current
session only. The configuration data will be lost
if the switch is restarted. To make the
configuration effective after a switch restart,
select Save Changes to enter the configuration
into non-volatile (NV-RAM).
Figure 1-5. Main Menu
9033691-01
Advertisement
Table of Contents
