Table of Contents
Advertisement
The IP Setup screen allows you to change the settings for
the Ethernet interface used for in-band communication.
The fields listed under the Current Switch IP Settings
heading are those that are currently being used by the
switch. Those fields listed under the Restart Settings
heading are those which will be used after the APPLY button
is selected.
To set the switch's IP address:
Highlight IP Setup from the main menu and press Enter.
To manually assign the switch's IP address, subnet
mask, and default gateway address:
Highlight the IP Address:[10.90.90.90] field and enter the
appropriate IP address.
Highlight the Subnet Mask:[255.0.0.0] field and enter the
appropriate subnet mask.
If you want to access the switch from a different subnet from
the one it is installed on, highlight the Default
18 VH-2402-L3 Management Guide
Figure 1-14. IP Setup Menu
The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
9033691-01
Advertisement
Table of Contents
