Table of Contents
Advertisement
Parameter
Group ID:[1]
Port:[1]
Group Width:[
Method:<Disabled>
9033691-01
Description
This field can be toggled between any
one of the six possible port trunking
groups configurable on the switch.
The Master port of trunk group.
]
Allows the entry of the number of
contiguous ports that will make up the
port trunking group. These ports will be
in sequential order from the Master Port.
This field can be toggled between
Enabled and Disabled. This is used to
turn a port trunking group on or off. This
is useful for diagnostics, to quickly isolate
a bandwidth intensive network device or
to have an absolute backup aggregation
group that is not under automatic control.
VH-2402-L3 Management Guide 81
Advertisement
Table of Contents
