Table of Contents
Advertisement
Reboot
The VH-2402-L3 has several reboot options.
To reboot the switch from the console:
Highlight Reboot from the Main Menu and press enter.
The reboot options are as follows:
Reboot simply restarts the switch. Any configuration
settings not saved using Save Changes from the Main
Menu will be lost. The switch's configuration will be restored
to the last configuration saved in NV-RAM.
Save Configuration & Reboot saves the configuration to
NV-RAM (identical to using Save Changes) and then
restarts the switch.
Reboot & Load Factory Default Configuration restarts the
switch using the default factory configuration. All
configuration data will be lost. This is identical to using
Factory Reset and then Reboot.
110 VH-2402-L3 Management Guide
Figure 1-89. Reboot Menu
9033691-01
Advertisement
Table of Contents
