Layer 2 Switch Settings - Enterasys VH-2402-L3 Management Manual

Layer 2 Switch Settings

To access the Layer 2 Switch Settings menu, highlight
Switch Settings from the Main Menu. Then highlight Layer
2 Switch Settings on the Switch Settings menu and press
Enter:
The following fields can then be set:
Parameter
Switch GVRP
:<Disabled>
Upper Threshold for
Master Ports:
[128]Kpps
Upper Threshold for
Module Ports:
[128]Kpps
9033691-01
Figure 1-24. Layer 2 Switch Settings Menu
Description
Allows the Group VLAN Registration
Protocol (GVRP) to be globally Enabled
or Disabled on the switch.
This is the number of thousands
Broadcast/Multicast packets per second
received by the switch – on one of the
Master Ports – that will trigger the switch's
reaction to a Broadcast/Multicast storm.
This is the number of thousands
Broadcast/Multicast packets per second
received by the switch – on one of the
module ports – that will trigger the
VH-2402-L3 Management Guide 33