Ip Connectivity Test (Ping) - Enterasys Vertical Horizon VH-8G Management Manual

IP Connectivity Test (Ping)

Use the IP Connectivity Test to see if another site on the Internet can be
reached. The screen shown below is described in the following table.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
IP Address
Test Times
Interval
Success/Failure
9033640
Vertical Horizon Local Management -- VH-8G
Network Configuration: IP Connectivity Test (Ping)
IP Address : 200.123.211.109
Test Times : 1
Success : 0
[Start]
<OK>
Figure 2-9. IP Connectivity Test
Description
IP address of the site you want to ping.
The number of ICMP echo requests to send to the specified site.
Range: 1~1000
The interval (in seconds) between pinging the specified site.
Range: 1~10 seconds
The number of times the specified site has responded or not to
pinging.
Interval : 3
Failure : 0
VH-8G User Interface 15