Table of Contents
Advertisement
Highlight MAC Address Filter and press enter.
When the switch is in Layer 2 Only operating mode, MAC
addresses can be entered into the static filtering table. The
switch can be configured to filter packets from this MAC
address (a source), or to it (a destination). The switch can
also be configured to filter all packets to or from this MAC
address (either a source or a destination).
Parameter
Action:<Add/Modify>
VID: [ ]
MAC Address:[
Source/Destination:
<Scr.>
68 VH-2402-L3 Management Guide
Figure 1-51. Setup MAC Address Filter
Description
This field can be toggled between
Add/Modify and Delete using the space
bar.
Allows the entry of the VLAN ID (VID) of
the VLAN to which the MAC address
below is a member of.
]
Allows the entry of a MAC address to be
filtered from the switch. This address
must be a unicast MAC address.
This field can be toggled using the space
bar between Src. (Source), Dst.
9033691-01
Advertisement
Table of Contents
