Table of Contents
Advertisement
T
To create an 802.1Q VLAN, toggle the Action:
<Add/Modify> field to Add/Modify using the space bar.
Enter a VLAN ID number in the VID#[ ] field and a name for
the new VLAN in the VLAN Name:[
Choose which ports will be members of the new VLAN and
enter their membership status in the Membership (E/F/-): [
][ ][ ] field. The status indicators of the individual ports can
be entered directly from the keyboard or toggled using the
space bar. Moving between the status indicators of the
individual ports is accomplished using the arrow keys.
To set the 802.1Q VLAN membership status of a port:
To enter the 802.1Q VLAN status for a port, highlight the first
field of Membership (E/F/-): [ ][ ][ ]. Each port's 802.1Q
VLAN membership can be set individually by highlighting the
port's entry using the arrow keys, and then toggling between
E, F, or – using the space bar.
Next, determine which of the ports that are members of the
new VLAN will be Tagged or Untagged ports.
To set a port as either a Tagged or an Untagged port:
Highlight the first field of Tagging (U/T):[ ][ ][ ] field. Each
port's state can be set by highlighting the port's entry using
the arrow keys and then toggling between U or T using the
space bar.
9033691-01
unchanged. When a tagged packet exits
the port, the tag is stripped and the packet
is changed to an untagged packet.
Tagging - specifies the port as a Tagging
member of the VLAN. When an untagged
packet is transmitted by the port, the
packet header is changed to include the
32-bit tag associated with the PVID (Port
VLAN Identifier – see below). When a
tagged packet exits the port, the packet
header is unchanged.
VH-2402-L3 Management Guide 37
] field.
Advertisement
Table of Contents
