Enterasys VH-2402-L3 Management Manual page 54

Toggle the Action:<Add/Modify> field to Add/Modify.
Choose a name for the interface to be added and enter it in
the Interface Name:[
be the same as its corresponding VLAN's name. The
corresponding VLAN ID must also be entered in the VID[ ]
field. Enter the interface's IP address and subnet mask in
the corresponding fields. Toggle the Active:<yes> field to
yes, highlight APPLY and press enter to make the IP
interface effective. Use Save Changes from the Main Menu
to enter the changes into NV-RAM.
Parameter
Action:<Add/Modify>
Interface Name:[
IP Address:[
46 VH-2402-L3 Management Guide
Figure 1-34. Layer 3 – IP Networking Menu
Description
This field can be toggled using the space
bar between Add/Modify and Delete.
Add/Modify allows for the creation of a
new IP interface or changes to an
existing IP interface. Delete allows for
the deletion of an existing VLAN from the
switch.
] This field allows the entry of a name for
the IP interface. The default IP interface
is named "System".
] This field allows the entry of an IP
address to be assigned to this IP
] field. The IP interface name must
9033691-01