Table of Contents
Advertisement
Highlight Utilities on the Main Menu and press Enter.
Highlight BOOTP/DHCP Relay on the Switch Utilities
menu and press Enter.
Parameter
BOOTP/DHCP Relay
Status <Disabled>
BOOTP HOPS Count
Limit [4 ]
BOOTP/DHCP Relay
Time Threshold:[4 ]
9033691-01
Figure 1-68. BOOTP/DHCP Relay Menu
Description
This field can be toggled between
Enabled and Disabled using the space
bar. It is used to enable or disable the
BOOTP/DHCP Relay service on the
switch. The default is Disabled.
This field allows an entry between 1 and
16 to define the maximum number of
router hops BOOTP messages can be
forwarded across. The default hop count
is 4.
Allows an entry between 0 and 65535
seconds, and defines the maximum time
limit for routing a BOOTP/DHCP packet.
If a value of 0 is entered, the switch will
not process the value in the seconds field
of the BOOTP or DHCP packet. If a non-
zero value is entered, the switch will use
that value, along with the hop count to
VH-2402-L3 Management Guide 87
Advertisement
Table of Contents
