Advanced Setup; Configuring Vlans; Vlans By Switch Operating Mode - Enterasys VH-2402-L3 Management Manual

Broadcast Storm
Mode:<Disabled>
Multicast Storm
Mode:<Disabled>

Advanced Setup

Changing switch operation mode setting changes some of
the menus and configuration options for the Advanced Setup
of the switch. The configuration data, however, is saved
when the switch's operating mode is changed.

Configuring VLANs

VLANs by Switch Operating Mode

To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions
and to configure the port settings for IEEE 802.1Q VLAN
34 VH-2402-L3 Management Guide
switch's reaction to a Broadcast/Multicast
storm.
This field can be toggled between
Enabled and Disabled using the space
bar. This enables or disables, globally, the
switch's reaction to Broadcast storms,
triggered at the threshold set above.
This field can be toggled between
Enabled and Disabled using the space
bar. This enables or disables, globally, the
switch's reaction to Multicast storms,
triggered at the threshold set above.
The switch allows the assignment of an IP
interface to each VLAN, in IP Routing mode. The
VLANs must be configured prior to setting up
the IP interfaces.
9033691-01