Table of Contents
Advertisement
.
Figure 1-41. Multicast Interface Configuration
This menu allows the assignment of a multicast routing
protocol to an IP interface. The IP interface must have been
previously configured on the switch.
In addition, IGMP may be enabled or disabled for the
selected IP interface.
The available multicast protocols are the Protocol
Independent Multicast – Dense Mode (PIM-DM), and the
Distance-Vector Multicast Routing Protocol (DVMRP).
INACT is not a multicast routing protocol. It is used to make
a given interface inactive for IP Multicast routing and can still
route IP traffic.
Parameter
Interface Name:[
Status: <Enabled>
9033691-01
Description
]
Allows the entry of the name of the IP
interface that is to be configured for
multicasting. This must be a previously
configured IP interface.
This field can be toggled between
Enabled and Disabled using the space
VH-2402-L3 Management Guide 55
Advertisement
Table of Contents
