Management Setup Menu - Enterasys Vertical Horizon VH-2402S2 Configuration Manual

Management Setup Menu

After initially logging onto the system, adjust the communication
parameters for your console to ensure a reliable connection (Serial Port
Configuration). Specify the IP addresses for the agent module (Network
Configuration / IP Configuration), and then set the Administrator and User
passwords (Console Login Configuration). Remember to record them in a
safe place. Also set the community string which controls access to the on-
board SNMP agent via in-band management software (SNMP
Configuration). The items provided by the Management Setup Menu are
described in the following sections.
Selection
Network
Configuration
Serial Port
Configuration
SNMP Configuration
Console Login
Configuration
TFTP Download
Agent F/W
Configuration Save &
Restore
Management
Configuration
9033820-03
Vertical Horizon Stack Local Management
Management Setup Menu
Network Configuration ...
Serial Port Configuration ...
SNMP Configuration ...
Console Login Configuration ...
TFTP Download Agent F/W...
Configuration Save & Restore ...
Management Configuration ...
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-7. Management Setup Menu
Description
Includes IP setup, Ping facility, HTTP (Web agent) setup, Telnet
configuration, and MAC address.
Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen
data refresh interval.
Activates traps; and configures communities and trap managers.
Sets user names and passwords for system access, as well as
the invalid password threshold and lockout time.
Downloads new version of firmware to update your Management
Module system (in-band).
Saves the switch configuration to a file on a TFTP server. This file
can be later downloaded to restore the configuration.
Specifies if management access to the switch is available from all
VLANs or restricted to one VLAN.
<OK>
VH-2402S2 User Interface 15