Power On / Off; Powering On - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

2 Product Overview

Power On / Off

Turn on the power before operating the machine.
The machine is ready for operation within 24 seconds after the power is turned on. The
time may vary depending on the machine configuration.
Turn the machine off at the end of the day or when it is not in use for a long period of
time. If you want to reduce power consumption, use the power saving feature.
Important •
For information on the power saving feature, refer to "Power Saver Mode" in Chapter 2 of the User
Guide.
Note

Powering On

2
The procedure for turning on the power is as follows.
1
Press the power switch to the [ | ]
position to turn the power on.
Note
Note
24
Switching off the power of the machine may cause loss of data being processed.
When the power is turned off, all functions of the machine will stop
•
machine off if it is used all day for receiving faxes.
The "Please wait..."
•
message indicates that the
machine is warming up.
The machine cannot be
used during warming up.
When the power does not
•
come on, check if the
power cord is plugged into
the power outlet and the
<RESET> button is in a
reset state (button is
pressed in).
Do not turn the
.
<RESET> button