Preparations; Installation Procedure; Installation Overview; Configuration On The Machine - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

9 Installation When Using EtherTalk

Preparations

Prepare the following items to install the machine when using EtherTalk interface.
EtherTalk network environment
Adobe PostScript 3 Kit (optional)

Installation Procedure

Installation Overview

The machine can be connected to computers using an EtherTalk network.
The following is the procedure to use EtherTalk.

Configuration on the machine

Setting EtherTalk on the machine.
Configuration on the computer
Installing a print driver.
Configuration on the Machine
The following describes the configuration procedure to connect the machine to an
EtherTalk network.
Enable the EtherTalk port.
Note
For information on how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.63).
1
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the user ID with the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
9
Note
3) Select [System Settings].
2
Enable the EtherTalk port.
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [EtherTalk], and select [Change Settings].
5) Select [Port Status], and select [Change Settings].
6) Select [Enabled], then select [Save].
3
Select [Close] repeatedly until the [System Settings] screen is displayed.
4
Select [Exit].
60
• EtherTalk can be configured when Adobe PostScript 3 Kit (optional) is installed.
• The configuration can also be performed using CentreWare Internet Services.
• The default user ID is "11111". When using the Authentication feature, a passcode is
required. The default passcode is "x-admin".