Http - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

10 Using CentreWare Internet Services
3
Click the [Properties] tab.
4
Click [+] at the left of [Protocol Settings] to display the items in the folder.
5
Click [POP 3].
6
Set the POP3 server.
1) Set [Server Address].
2) Set [Port Number].
Note
3) Set [POP Receive Password Encryption].
4) Set [User Name].
5) Enter [User Password].
7
Set [POP3 Server Check Interval] of [Incoming E-mail Settings].
8
Reflect the values as the machine's setting values.
1) Click [Apply]. A screen to enter the user name and passcode will be displayed.
2) Enter the System Administrator user ID and passcode into [User Name] and
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot Machine]. The machine will reboot and the setting values will be

HTTP

This section describes the settings for the HTTP port.
10
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address box on the
browser, and press the <Enter> key.
88
• Do not use the numbers of any other ports.
[Password], and click [OK].
The default user ID is "11111" and the default passcode is "x-admin".
•
reflected.