Interface Cables; Using The Parallel Interface; Using The Usb Interface - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

2 Product Overview

Interface Cables

When connecting the machine directly to a computer, use either the parallel interface
or USB interface. When connecting to a network, use the Ethernet interface.

Using the Parallel Interface

This section describes the installation procedure for the parallel interface.
Note
1
Ensure that the machine is off.
2
Insert the connector of the interface
cable into the machine's parallel
interface connector and fasten it
2
with the clips on either side of the
connector.
3
Connect the other end of the
interface cable to a computer.
4
Switch on the machine.
5
Restart the computer.
For details of setting items, refer to "Installation When Using Parallel Port" (P.33).

Using the USB Interface

The USB interface supports USB 2.0.
This section describes the installation procedure for the USB interface.
1
Ensure that the machine is off.
2
Connect the USB interface cable to
the USB 2.0 interface connector on
the side of the machine.
3
Connect the other end of the USB
interface cable to a computer.
4
Switch on the machine.
5
Restart the computer.
For details of setting items, refer to "Installation When Using USB Port" (P.37).
26
• When connecting with a computer using parallel interface, our parallel interface cable
(optional) is required. For information on accessories, refer to "Optional Components" in
"Chapter 17 Appendix" in the User Guide.
Parallel
USB 2.0