Control Panel - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

2 Product Overview

Control Panel

The following describes the names and functions of components on the control panel.
001 002 003 016 017
004 005 006 019 020
007 008 009 022 023
010 011 012
025 026
013 014 015 028 029
2
21
No. Component
1 Contrast dial
2 Touch screen
3 <Online> indicator
4 <Job in Memory> indicator
5 <Job Status> button
6 <Review> button
7 <Machine Status> button
8 <Log In/Out> button
9 <Power Saver> button
28
1 2
018
021
024
027
030
20
Adjusts the contrast of the touch screen. Use this dial to enhance or
decrease the contrast.
Displays messages required for operation and buttons for various
features. You can directly touch the touch screen to instruct operations
and set features.
Lights when the machine is sending or receiving data to or from a client.
Lights when data is stored in the machine's memory.
You can check stored documents in [Stored Documents List]. For
information on [Stored Documents List], refer to "Print Report/List"
under "Chapter 13 Machine Status" in the User Guide.
Press this button to confirm or cancel currently executing or completed
jobs, or to confirm or print saved documents.
In this manual, this button is indicated as the <Job Status> button.
Press this button to open the [Review] screen. In this screen, you can
check a list of the status of copy, fax and scan features whose settings
have changed from the defaults. You can also check the destination
information for sending faxes and e-mail.
In this manual, this button is indicated as the <Review> button.
Press this button to confirm the machine status and meters, check the
state of consumables, and print reports.
In this manual, this button is indicated as the <Machine Status> button.
Press this button to display the user ID input screen for System
Administration mode or Login Setup/Auditron Administration.
In this manual, this button is indicated as the <Log In/Out> button.
If the machine is not operated for a while, the machine's power
consumption is lowered to enter the power saver mode. In the power
saver mode, this button lights up. To cancel the power saver mode,
press this button again.
In this manual, this button is indicated as the <Power Saver> button.
3 4 5 6 7
1 2 3
4 5 6
7 8 9
0
#
C
19 18 17 16 15 14
Function
9
8
10
11
12
13