Fuji Xerox DocuCentre-II 3005 Administrator's Manual page 80

10 Using CentreWare Internet Services
When selecting an existing destination
Use the [Trap Notification] pull-down menu to select a destination, and proceed to step
9.
When registering a new destination or when modifying the settings for an
existing destination
1) Use the [Trap Notification] pull-down menu to register a new destination or to select
2) Click [Edit]. A window appears prompting you to enter the user name and
3) Enter the system administrator's user ID and passcode into [User Name] and
Note
4) Select a transport protocol from [Transport].
5) If you selected [IPX] under [Transport], set [Network Number (IPX)], [MAC Address
6) If you selected [UDP] under [Transport], set [IP Address (UDP)], [Port Number
Note
7) Click [Apply].
8) The right frame on the web browser will change to the machine reboot display.
9) Click [Reboot Machine]. The machine will reboot and the setting value will be
9
Reflect the values as the machine's setting values.
1) Click [Apply]. A screen to enter the user name and passcode will be displayed.
2) Enter the System Administrator user ID and passcode into [User Name] and
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot Machine]. The machine will reboot and the setting value will be
10
78
an existing destination.
passcode.
[Password] respectively, and then click [OK].
• The factory default user ID and passcode are [11111] and [x-admin] respectively.
(IPX)], [Socket Number (IPX)], [Trap Version], [Community String (Trap
Notification)], and [Notification Event].
(UDP)], [Trap Version], [Community String (Trap Notification)], and [Notification
Event].
• Do not use the existing port numbers.
reflected.
[Password], and click [OK].
• The default user ID is "11111" and the default passcode is "x-admin".
reflected.