Fuji Xerox DocuCentre-II 3005 Administrator's Manual page 133

Domain filtering
Select one from [Off], [Enter Permitted Domain Names], or [Enter Rejected Domain
Names].
[Domain 1] - [Domain 50]
Specify up to 50 domains if either [Enter Permitted Domain Name] or [Enter Rejected
Domain Name] has been selected for [Domain Filter].
2) Select [Close] repeatedly until the [Network Settings] screen is displayed.
6
Set the S/MIME information.
1) Select [PKI (Public Key) Settings].
2) Select [S/MIME Settings] and set the following items.
Device Certificate - S/MIME
Link a certificate to the machine. For information on creating a certificate, refer to
"HTTP" (P.88).
S/MIME Communication
Set whether to enable or disable S/MIME Communication when a certificate ID is set.
Receive Untrusted E-mail
Set whether to receive untrusted e-mail or not.
Receive Untrusted iFAX
Set whether to receive untrusted iFAX or not.
Message Digest Algorithm
Select a message digest algorithm from [SHA1] or [MD5].
Contents Encryption Method
Select a contents encryption method from [3DES], [RC2-40], [RC2-64], or [RC2-
128].
Digital Signature - Outgoing E-mail
Set whether to always attach a digital signature to e-mail or select a digital signature
when sending e-mail.
Digital Signature - Outgoing iFAX
Set whether to always attach a digital signature to e-mail or select a digital signature
when sending iFAX.
Certificate Auto Store
Select whether or not to automatically store a S/MIME certificate attached with the
e-mail when receiving e-mail sent from an address registered in the address book.
7
Select [Close] repeatedly until the [System Settings] screen is displayed.
8
Select [Exit].
9
After the machine is restarted, print a settings list to confirm that each item is
configured.
For information on how to print a settings list, refer to "Print Report/List" under "Chapter 13 Machine
Status" in the User Guide.
Installation Procedure
13
131