Networking Menu
Deselect the Address Filtering check box to disable address filtering.
The default setting is 'Disabled'.
If address filtering has been enabled:
4
Enter an IP or MAC Address in the IP or MAC Address text box in the following
a
format xxx.xxx.xxx.xxx.
Note
CIDR (Classless Inter-Domain Routing) is supported when using address filtering.
If using a CIDR address use the following format xxx.xxx.xxx.xxx/xx.
Select Add.
b
Select Apply to save the settings.
5
Editing an Address Filter
Edit an existing address filter.
Procedure 7-13 Edit an Address Filter
Step
Action
Select Firewall from the Networking menu.
1
Select the Address Filtering tab.
2
The Address Filtering tab displays.
Select
3
Select Apply to save the changes to the address filter.
4
Edit the IP or MAC Address in the IP or MAC Address text box.
5
Select Add to save the changes.
6
Or
Select Cancel.
Deleting an Address Filter
Delete an existing address filter.
7-86
to edit the corresponding address filter.
- End -
- End -
Configuration and User Guide