Networking Menu
Reset the Dome to Factory Default Settings
Restore the settings on the dome to factory default.
Note
Network settings, presets, patterns and sequences can be retained if required.
Procedure 7-21 Resetting the dome
Step
Action
Select Maintenance from the Networking menu.
1
Select the Reset tab.
2
The Reset tab displays.
Select the Preserve networking settings check box to retain the current network settings
3
during the dome reset.
Or
Deselect the Preserve networking settings to restore the default networking settings.
The default setting is 'Enabled'.
Select the Preserve presets, patterns and sequences check box to retain the current
4
presets, patterns and sequences during the dome reset.
Or
Deselect the Preserve presets, patterns and sequences to remove existing presets,
patterns and sequences.
The default setting is 'Enabled'.
Select Reset
5
You will be prompted to confirm the dome reset.
Select OK to confirm.
6
Or
Select Cancel.
7-92
- End -
Configuration and User Guide