Sequences; Adding A Sequence; Activating A Sequence - American Dynamics ADCI625-P221 Configuration And User's Manual

Programs Menu

Sequences

A Sequence is a sequential display of multiple camera Presets. Sequences provide a methodical
and effective way to monitor multiple areas of interest by switching to different Presets
automatically.
Sequences are created by identifying Preset views to include in the Sequence and specifying a
dwell time that controls how long each Preset remains on-screen before switching to another
Preset.
Up to 16 Sequences can be created, each with 16 steps (Presets).

Adding a Sequence

Create a new sequence on the dome using defined presets. Refer to Adding a new Preset if no
presets have yet been added to the dome.
Procedure 5-1 Add a Sequence
Step Action
If no presets have been created refer to Adding a new Preset before continuing to step 2.
1
Select Sequences from the Programs menu.
2
Select the Add Sequence tab.
3
The Add Sequence tab displays.
Enter the sequence name in the Sequence text box.
4
Select a preset from the Preset Name drop-down menu.
5
Enter a dwell time in seconds in the Dwell Time text box.
6
Select Add. The preset is now listed as part of the sequence.
7
Or
Select Cancel.
Repeat steps 5 to 7 to add further presets to the sequence.
8
Note
Up to 16 presets can be added to a sequence.
Select Apply to save the sequence.
9

Activating a Sequence

Activate a selected sequence.
5-42
- End -
Configuration and User Guide