Connection; Default Ip Address; Connecting From A Computer & Viewing Preparation - American Dynamics Illustra Flex series User Manual

2.3 Connection

2.3.1 Default IP address

Since this is a network-based unit, an IP address must be assigned at the very first. The unit's default IP
address is 192.168.1.168 and sub mask is 255.255.255.0. However, if you have a DHCP server in your
network, the unit would obtain an IP address automatically from the DHCP server so that you don't need to
change the camera's IP address. But be sure to enable DHCP in "Network/Basic settings".
2.3.2 Connecting from a computer & Viewing Preparation
2.3.2.1 Connecting from a computer
1. Make sure the unit and your computer are in the same subnet.
2. Check whether if the networking available between the unit and the computer by executing ping the
default IP address. To do this, simply start a command prompt (Windows: from the Start Menu, select
Program. Then select Accessories and choose Command Prompt.), and type "Ping 192.168.1.168". If
the message "Reply from..." appears, it means the connection is available.
3. Start Internet Explorer and enter IP address: 192.168.1.168. A login window should pop up. In the
window, enter the default user name: admin and password: admin to log in.
Further information on administration of the unit can be found in "3. Administration and Configuration".
F 2-4: L W
IGURE OGIN INDOW
12
Illustra Flex 1MP & 3MP Box Camera