Rebooting The Dome - American Dynamics ADCI625-P221 Configuration And User's Manual

Procedure 7-19 Delete a HTTPS Certificate
Step Action
Select Maintenance from the Networking menu.
1
Select the HTTPS Certificate tab.
2
The HTTPS Certificate tab displays.
Select Delete.
3
The camera will display a "Restarting HTTPS Service" page with a progress bar showing
the deletion progress.
When complete the camera will return to the log in page.
4
Refer to Procedure 3-1 Log in to the Dome.
5

Rebooting the Dome

Perform a reboot of the dome.
Procedure 7-20 Reboot the dome
Step Action
Select Maintenance from the Networking menu.
1
Select the Reboot tab.
2
The Reboot tab displays.
Select Reboot.
3
You will be prompted to confirm the dome reboot.
Select OK to confirm.
4
Or
Select Cancel.
The camera will display a "Rebooting" page with a progress bar showing the reboot
5
progress.
When the dome is restarted it checks its functionality by performing a homing routine
during which the camera pans and then either goes to the start point of the 'apple peel'
pattern or if powered up once before, to the last position in memory. Once the camera
stops, it is online and ready to be accessed and controlled.
- End -
- End -
Networking Menu
7
7-91