Shutter Speed; Changing The Shutter Speed; Max Gain; Configuring Max Gain - American Dynamics ADCI625-P221 Configuration And User's Manual

Shutter Speed

Changing the Shutter Speed

Selecting a fast shutter speed will give the least amount of artifacts but reduced low light
performance, a slower shutter speed will give better low light performance but more artifacts will
be visible.
Procedure 4-11 Configure Shutter Speed
Step Action
Select Picture Settings from the View menu.
1
Select the Shutter Limit tab.
2
The Shutter Limit tab displays.
When 'openshutter' is selected from the AGC/Shutter setting the Shutter speed section
display.
Select a Shutter speed setting from the drop down menu:
3
• 1/2
• 1/4
• 1/8
• 1/15
• 1/30
The selection will be applied.
The default setting is '1/8'.

Max Gain

The Max Gain setting is an upper limit for how much gain can be increased when AGC is enabled.
The trade-off between picture level (brightness) and noise may be adjusted by setting the Max
Gain value. Lower values for Max Gain setting may result in a darker picture but with less noise.
Higher values for Max Gain setting may result in a brighter picture but with more noise.

Configuring Max Gain

Adjust max gain settings on the dome.
- End -
View Menu
4
4-27