Procedure 7-27 Enable/Disable ONVIF Discovery Mode
Step
Action
Select Advanced Settings from the Networking menu.
1
Select the Remote Access tab.
2
The Remote Access tab displays.
Select the ONVIF Discovery Mode check box to enable ONVIF Discovery Mode.
3
Or
Deselect ONVIF Discovery Mode check box to disable ONVIF Discovery Mode.
The default setting is 'Enabled'.
ONVIF User Authentication
Note
To utilize ONVIF User Authentication, there must be at least one admin level user in the ONVIF
service.
Procedure 7-28 Enable/Disable ONVIF User Authentication
Step
Action
Select Advanced Settings from the Networking menu.
1
Select the Remote Access tab.
2
The Remote Access tab displays.
Select the ONVIF User Authentication check box to enable ONVIF User Authentication.
3
Or
Deselect ONVIF User Authentication check box to disable ONVIF User Authentication.
The default setting is 'Enabled'.
Dynamic DNS
Configure the Dynamic DNS settings for the camera.
- End -
- End -
Networking Menu
7
7-97