American Dynamics ADCI625-P221 Configuration And User's Manual page 18

Installation
The dome will begin its initial boot up sequence which will take approximately 1 to 2
minutes.
The dome will attempt to obtain an IP Address from the DHCP Server. When no DHCP
2
Server is available the dome will be assigned a Static IP address of 192.168.1.168.
Open Microsoft Internet Explorer and enter the URL of the dome as https://192.168.1.168.
3
Note
1 The computer being used to configure the dome must have an IP address on
the same subnet.
2 Illustra Connect can also be used to discover the dome when using a Static IP
Address. Refer to Procedure 2-1 Installing the Illustra 625 PTZ using Illustra
Connect and begin at Step 3.
Refer to the Web Configuration chapter for details on how to log in to the dome and modify
4
the configuration.
2-8
- End -
Configuration and User Guide