Tcp/Ip; Ipv4; Ipv6 - American Dynamics ADCI625-P221 Configuration And User's Manual

Networking Menu

TCP/IP

Configure the IPv4 and IPv6 settings on the dome.

IPv4

Set IPv4 settings for the dome.
Procedure 7-1 Configure the IPv4 Settings
Step Action
Select TCP/IP from the Networking menu.
1
The IPv4 tab displays.
Select the Enable DHCP check box to enable DHCP and disable manual settings entry.
2
Or
Deselect to disable DHCP and allow manual settings entry.
The default setting is 'Enabled'.
If Enable DHCP has been disabled:
3
Enter the IPv4 Address in the IPv4 Address text box in the form xxx.xxx.xxx.xxx.
a
Enter the Network Mask in the Network Mask text box xxx.xxx.xxx.xxx.
b
Enter the Gateway IP address in Gateway text box xxx.xxx.xxx.xxx.
c
Enter the Primary DNS Server in the Primary DNS Server text box xxx.xxx.xxx.xxx.
d
Enter the Secondary DNS Server in the Secondary DNS Server text box
e
xxx.xxx.xxx.xxx.
Select Apply to save the settings.
4

IPv6

Enable IPv6 on the dome.
Procedure 7-2 Enable/Disable IPv6
Step Action
Select TCP/IP from the Networking menu.
1
Select the IPv6 tab.
2
The IPv6 tab displays.
Select the IPv6 Enable check box to enable IPv6 on the dome.
3
Or
Deselect the IPv6 Enable check box to disable IPv6 on the dome.
7-76
- End -
Configuration and User Guide