2.3.3 Default IP address
Since this is a network-based unit, the unit's default IP address was assigned by Router in DHCP server
mode. Please enabled a DHCP server in your network, the unit would obtain an IP address automatically
from the DHCP server so that you don't need to change the camera's IP address.
2.3.4 Internet options setting from PC
Please open network connection status and then click Properties.
Enable IPv4 in Internet options.
F
2-7: I
IGURE
NTERNET OPTIONS
F
2-8: I
IGURE
NTERNET OPTIONS
14
Illustra Flex Series 1MP Wireless Cube
1/3
2/3