Resolution
1280x720
1280x720
Configuring the Web Video Stream
Adjust the settings for video displayed on the live video pane and video used for alarms.
Procedure 6-10 Configure the Video Stream settings
Step
Action
Select Video from the Camera Configuration menu.
1
The Stream 1 tab displays.
Select either the Stream 1 or Stream 2 tab to configure the settings.
2
Select the required Codec by selecting the radio buttons:
3
• H264
• MJPEG
The default setting is 'H264'.
Select the required Resolution from the drop-down menu:
4
• (1920x1080) - 1080p
• (1600x900) - HD+
• (1280x720) - 720p
• (1024x576) - PAL+
• (960x540) - qHD
• (800x450)
• (640x360)
• (480x270)
• (320x180)
• (160x90)
The default setting is '(1280x720) - 720p'.
Use the slider bar to select the Frame Rate (ips).
5
The default setting is 30.
If MJPEG has been selected, MJPEG Quality will be enabled. Use the slider bar to select
6
the MJPEG Quality.
The default setting is 50.
OR
If H264 has been selected, Rate Control will be enabled. Select the required Rate Control
7
by selecting the radio buttons:
FPS
Recommended Maximum Quality
15
7
Camera Configuration Menu
80
90
6
6-67