Table of Contents
Advertisement
21 - 74
AUTOMATIC TRANSMISSION - NAG1
DRIVING CLUTCH K1
DISASSEMBLY
(1) Remove snap-ring (11) (Fig. 75) from outer
multiple-disc carrier (6).
(2) Take multiple-disc pack (12) out of outer mul-
tiple-disc carrier (6).
1 - K1 OUTER DISC CARRIER
2 - FREEWHEELING CLUTCH F1
3 - SNAP-RING
4 - OUTER DISC CARRIER SEALING RING
5 - PISTON SEALING RING
6 - PISTON
spring plate (8) and compress the spring until the
snap-ring (10) is exposed.
by carefully blowing compressed air into the bore (A).
wheeling clutch F1 (2).
Fig. 75 Driving Clutch K1 Components
7 - DISC SPRING
8 - SPRING PLATE
9 - SPRING PLATE SEALING RING
10 - SNAP-RING
11 - SNAP-RING
12 - MULTIPLE DISC PACK
(3) Place Multi-use Spring Compressor 8900 on the
(4) Remove snap-ring (10) (Fig. 75).
(5) Take out disc spring (7) and remove piston (6)
(6) Remove snap-ring (3) and take out front free-
VA
Advertisement
Table of Contents
