Table of Contents
Advertisement
VA
AUTOMATIC TRANSMISSION - NAG1 (Continued)
THIRD GEAR POWERFLOW
Torque from the torque converter is increased via
the drive shaft (25) and the center planetary gearset
and transferred to the output shaft (26) (Fig. 6) and
(Fig. 7).
1 - TORQUE CONVERTER LOCK-UP CLUTCH
2 - TORQUE CONVERTER TURBINE
3 - TORQUE CONVERTER IMPELLER
4 - HOLDING CLUTCH B1
5 - HOLDING CLUTCH B3
6 - HOLDING CLUTCH B2
7 - DRIVING CLUTCH K1
8 - FRONT PLANETARY ANNULUS GEAR
9 - DRIVING CLUTCH K2
10 - CENTER PLANETARY ANNULUS GEAR
11 - REAR PLANETARY ANNULUS GEAR
12 - DRIVING CLUTCH K3
13 - FRONT PLANETARY CARRIER
A - ENGINE SPEED
B - TRANSMISSION INPUT SPEED
AUTOMATIC TRANSMISSION - NAG1 21 - 9
Front Planetary Gear Set
The planetary carrier (13) and sun gear (21) are
connected via the engaged multiple-disc clutch K1
(7). The planetary gearset is therefore locked and
turns as a closed unit at the input speed due to the
mechanical connection of the annulus gear (8) and
drive shaft (25).
Fig. 6 Third Gear Powerflow
14 - CENTER PLANETARY CARRIER
15 - REAR PLANETARY CARRIER
16 - TORQUE CONVERTER STATOR
17 - FRONT PLANETARY PINION GEARS
18 - CENTER PLANETARY PINION GEARS
19 - REAR PLANETARY PINION GEARS
20 - FREEWHEELING CLUTCH F1
21 - FRONT PLANETARY SUN GEAR
22 - CENTER PLANETARY SUN GEAR
23 - REAR PLANETARY SUN GEAR
24 - FREEWHEELING CLUTCH F2
25 - DRIVE SHAFT
26 - OUTPUT SHAFT
C - FIRST GEAR RATIO
D - FIXED PARTS
Advertisement
Table of Contents
